The VIVO STAND-V001 is a single-screen desk mount for people who want to raise and reposition a compatible monitor while freeing the area beneath its stand.
This vivo single monitor desk mount review looks at its broad adjustment range, clamp or grommet mounting, and the compatibility checks worth making before you buy.
VIVO STAND-V001 Review Summary
The quick verdict

20,000+ ratings
Read Amazon ReviewsVIVO STAND-V001 Single Monitor Desk Mount
A flexible single-screen mount for desks and compatible monitors up to 38 inches, with clamp or grommet installation and broad angle adjustment.
- Designed for one monitor weighing up to 22 pounds.
- Fits monitors with VESA 75 x 75 mm or 100 x 100 mm mounting holes.
- Listed screen-size guidance covers most monitors from 13 to 32 inches and ultrawides up to 38 inches.
- Provides +90° to -90° tilt, 360° swivel, and 360° rotation.
Pros
- The wide adjustment range makes it easier to set a compatible monitor at a preferred height and angle.
- Clamp and grommet mounting give buyers two ways to attach the pole to a desk.
Consider before buying
- Monitor size alone does not establish fit: the screen must also meet the weight limit and VESA pattern requirements.
- Clamp installation is limited to desks up to 3.25 inches thick; check desk construction and underside clearance before ordering.
Read the full review summary
The STAND-V001 combines a center pole with an articulating arm, so you can adjust screen height and viewing angle without relying on the monitor’s original base.
Its listed fit covers most 13- to 32-inch monitors and ultrawides up to 38 inches, provided the screen weighs no more than 22 pounds and uses a VESA 75 x 75 mm or 100 x 100 mm pattern.
This design is a good match for a single-screen workspace where flexible positioning and a less crowded desktop matter. The desk clamp supports surfaces up to 3.25 inches thick, and an optional grommet mount is included.
Before choosing it, check your monitor’s weight and mounting pattern, along with whether your desk can accept the clamp or has a suitable grommet opening.
The buying factors
VIVO STAND-V001 Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Monitor compatibility
Supports up to 22 pounds and VESA 75 x 75 mm or 100 x 100 mm; listed size guidance extends to ultrawides up to 38 inches.
Positioning flexibility
Offers broad tilt, swivel, and rotation, plus up to 16 inches of height adjustment along the center pole.
Desk mounting options
Includes a hand-tightened clamp for desks up to 3.25 inches thick and an optional grommet mount.
Orientation choices
The screen can be placed in portrait or landscape orientation, useful for changing how a compatible display is used.
Cable organization
Detachable clips on the arms and center pole provide a way to route power and AV cables.
Setup convenience
A detachable VESA plate, assembly hardware, and instructions are included to support installation.
Key Features and Specifications of VIVO STAND-V001
- Designed for one monitor weighing up to 22 pounds.
- Fits monitors with VESA 75 x 75 mm or 100 x 100 mm mounting holes.
- Listed screen-size guidance covers most monitors from 13 to 32 inches and ultrawides up to 38 inches.
- Provides +90° to -90° tilt, 360° swivel, and 360° rotation.
- Height adjusts up to 16 inches along the center pole; the screen can be oriented in portrait or landscape.
- Uses a hand-tightened desk clamp for surfaces up to 3.25 inches thick, with an optional grommet mount included.
- Detachable cable clips attach to the arm and center pole, and the package includes a detachable VESA plate, hardware, and instructions.
Pros and Cons of VIVO STAND-V001
Pros
- The wide adjustment range makes it easier to set a compatible monitor at a preferred height and angle.
- Clamp and grommet mounting give buyers two ways to attach the pole to a desk.
- The stated size range includes ultrawide monitors up to 38 inches, subject to weight and VESA limits.
- Cable clips and the raised screen position can help keep the desktop more organized.
Consider before buying
- Monitor size alone does not establish fit: the screen must also meet the weight limit and VESA pattern requirements.
- Clamp installation is limited to desks up to 3.25 inches thick; check desk construction and underside clearance before ordering.
- A single-arm mount is intended for one display, so it will not serve a setup that needs a second screen on the same stand.
Who Should Buy VIVO STAND-V001?
Good fit
Consider the STAND-V001 if you use one compatible monitor and want to adjust its height, tilt, swivel, or orientation after installation.
Its 16-inch height adjustment along the center pole and full rotation can suit desks where a fixed monitor base makes it harder to position the screen for the task at hand.
It is also worth considering if you want to reclaim some of the desktop area occupied by a monitor base.
Check the monitor’s weight, VESA hole spacing, and screen size, then confirm your desk works with either the included clamp or grommet option.
Those checks matter especially for a larger display, since the maximum size guidance does not override the weight and mounting limits.
The detachable VESA plate and included assembly materials may make the installation process more manageable.
Cable clips offer a practical way to route wires along the pole and arm, though the finished setup will depend on your monitor’s cables and desk layout.
Who should skip it
Skip this model if your intended monitor exceeds 22 pounds, lacks the supported VESA pattern, or falls outside the stated screen-size range. Confirm the screen’s mounting details before buying rather than relying on diagonal size alone.
Look elsewhere if you need a stand for multiple monitors or cannot use either a desk clamp or grommet mount. This is a single-screen desk mount, and its installation depends on an appropriate attachment point.
How the VIVO STAND-V001 fits a single-monitor desk
Check fit by weight and VESA pattern
The mount’s compatibility depends on more than screen size. The monitor must weigh no more than 22 pounds and have a 75 x 75 mm or 100 x 100 mm VESA pattern.
The listed guidance spans typical screens from 13 to 32 inches and ultrawides up to 38 inches, but buyers should check their specific model against all of these limits.
Use the adjustment range to shape the setup
The arm offers +90° to -90° tilt, 360° swivel, and 360° rotation, while the center pole allows up to 16 inches of height adjustment. That combination gives a compatible display several ways to move as your workspace changes.
Portrait and landscape orientation add another option for how the screen is presented.
Choose the attachment that suits the desk
The included clamp attaches by hand to desks up to 3.25 inches thick, while the included grommet mount provides an alternative when the desk has an appropriate opening.
Measure the desk and inspect the underside before installation so the mounting point and surrounding space suit your setup.
Consider the whole desktop arrangement
Cable clips on the arm and pole can guide power and AV cables along the mount.
Raising the monitor also moves its original base off the work surface, which may leave more room for other desk items; the practical benefit depends on the screen, cables, and where you position the arm.
Alternatives to VIVO STAND-V001
Computer Monitor Arms alternative

5,000+ ratings
Read Amazon ReviewsVIVO STAND-V001H Freestanding Monitor Stand
Choose the STAND-V001H if you prefer a freestanding base and can spare the desk area it occupies. The STAND-V001 is the better fit when you want clamp or grommet mounting and a wider stated tilt and swivel range.
- The STAND-V001H is a freestanding single-monitor stand with a steel base.
- It supports monitors up to 22 pounds, lists ultrawides up to 38 inches, and provides height adjustment, ±15° tilt, 90° swivel, and 360° rotation.
- The STAND-V001 uses a desk clamp or included grommet mount and offers +90° to -90° tilt, 360° swivel, and 360° rotation.
Computer Monitor Arms alternative

3,000+ ratings
Read Amazon ReviewsVIVO STAND-V002C Monitor and Laptop Desk Mount
Consider the STAND-V002C if you want to position a monitor and a laptop together on one mount. For a single compatible monitor and a wider range of angle adjustments, the STAND-V001 is the more focused option.
- The STAND-V002C combines an arm for a monitor up to 32 inches and 22 pounds with a vented laptop tray for laptops up to 17 inches.
- It offers ±15° tilt, 180° swivel, and 360° rotation, with clamp or grommet mounting for desks up to 4 inches thick.
- The STAND-V001 is for one monitor and supports screens up to 22 pounds, with clamp or grommet desk mounting.
Is VIVO STAND-V001 Worth It?
The VIVO STAND-V001 is worth considering if you want a flexible mount for one monitor and your screen meets its weight, size, and VESA requirements.
Its broad tilt, swivel, rotation, and height adjustment offer useful positioning choices, while the clamp and grommet options suit different desk layouts.
Check monitor compatibility and desk attachment before ordering.
If those details fit your setup, this mount offers a practical way to raise and reposition a single screen; if you need a freestanding base or space for another device, choose a design built around that arrangement.
Your review at a glance

20,000+ ratings
Read Amazon ReviewsVIVO STAND-V001 Single Monitor Desk Mount
A flexible single-screen mount for desks and compatible monitors up to 38 inches, with clamp or grommet installation and broad angle adjustment.
- Designed for one monitor weighing up to 22 pounds.
- Fits monitors with VESA 75 x 75 mm or 100 x 100 mm mounting holes.
- Listed screen-size guidance covers most monitors from 13 to 32 inches and ultrawides up to 38 inches.
- Provides +90° to -90° tilt, 360° swivel, and 360° rotation.