The SMALLRIG Universal Phone Holder Mount review is for creators who want a phone clamp that can connect to a camera or tripod and switch between portrait and landscape framing.
Its broad phone-width range and accessory mounts make it useful for compact filming and streaming setups.
SMALLRIG Phone Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount 4382
A flexible camera and tripod phone clamp for creators who want portrait and landscape framing with room for a light or microphone.
- Fits smartphones with widths from 57 to 88 mm.
- Attaches to a compatible camera or tripod using a 1/4-inch-20 threaded hole or the base cold shoe.
- Rotates between landscape and portrait orientation and locks at 90 degrees.
- Two rotary joints allow up to 180 degrees of adjustment.
Pros
- Works with a broad range of phone widths instead of being tied to one phone model.
- Offers camera and tripod attachment through two common mounting interfaces.
Consider before buying
- Phone fit depends on width, so check the phone with its case on against the 57–88 mm range before buying.
- The 500 g load limit calls for care when choosing a phone and adding accessories to the rig.
Read the full review summary
The 4382 combines a spring-style phone cradle with a 1/4-inch-20 threaded hole and a cold shoe on the base, so it can attach to compatible camera or tripod setups.
Two rotary joints provide up to 180 degrees of adjustment, and the holder locks when rotated 90 degrees for a change between landscape and portrait orientation.
It suits phone photographers, vloggers, interviewers and livestreamers who want to add a phone to a small rig without relying on a particular phone brand. Compatibility is based on device width, from 57 to 88 mm.
The stated 500 g load capacity is a limit to keep in mind when assembling a rig with accessories.
The buying factors
SMALLRIG Phone Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Phone compatibility
The 57–88 mm width range covers many smartphones and is not limited to a single phone brand.
Orientation flexibility
A 90-degree lock supports quick switching between landscape and portrait, while two rotary joints offer up to 180 degrees of adjustment.
Mounting options
The base combines a 1/4-inch-20 threaded hole with a cold shoe for camera or tripod attachment.
Accessory expansion
A top cold shoe and threaded holes provide places for compatible lighting, microphones and power-bank holders.
Rig capacity
The 500 g maximum load is useful to consider when adding a phone and other equipment to a setup.
Portability
At 73 g, the holder adds relatively little weight to a portable filming kit.
Key Features and Specifications of SMALLRIG Phone Mount
- Fits smartphones with widths from 57 to 88 mm.
- Attaches to a compatible camera or tripod using a 1/4-inch-20 threaded hole or the base cold shoe.
- Rotates between landscape and portrait orientation and locks at 90 degrees.
- Two rotary joints allow up to 180 degrees of adjustment.
- A top cold shoe accommodates a compatible microphone or light.
- Multiple threaded holes support accessories such as compatible SMALLRIG power-bank holders; maximum load capacity is 500 g.
- The holder weighs 73 g and is made with aluminium, stainless steel and silicone.
Pros and Cons of SMALLRIG Phone Mount
Pros
- Works with a broad range of phone widths instead of being tied to one phone model.
- Offers camera and tripod attachment through two common mounting interfaces.
- Makes portrait-to-landscape changes straightforward with a 90-degree locking rotation.
- Provides additional mounting points for compatible accessories.
Consider before buying
- Phone fit depends on width, so check the phone with its case on against the 57–88 mm range before buying.
- The 500 g load limit calls for care when choosing a phone and adding accessories to the rig.
- The package includes the phone holder only, so a compatible camera, tripod and any desired accessories are separate.
Who Should Buy SMALLRIG Phone Mount?
Good fit
Consider the 4382 if you want to place a smartphone on a camera or tripod and change orientation during recording.
The width-based compatibility makes it a practical choice for households or teams that use different phone models, provided each device falls within the supported range.
It also makes sense for compact creator setups that benefit from a light or microphone mounted close to the phone.
Before assembling a rig, check that your phone fits with its case and that the combined equipment remains within the 500 g maximum load.
Who should skip it
Look elsewhere if your phone is narrower than 57 mm or wider than 88 mm, or if your intended setup would exceed the stated load capacity.
Buyers who need a phone mount supplied with its own tripod or accessories should also account for those as separate components.
How the SMALLRIG Phone Mount fits a compact filming rig
Check phone fit before building around it
The clamp’s 57–88 mm range gives it broad device compatibility, but width is the deciding measurement. Cases can change a phone’s overall width, so measure the device in the configuration you plan to use.
That simple check is especially helpful if the mount will be shared among several phones.
Orientation changes and framing
The holder can rotate into portrait or landscape and lock after a 90-degree turn. Two rotary joints add up to 180 degrees of adjustment, giving creators room to position a phone for different framing needs.
Consider the surrounding camera or tripod setup when judging whether the available articulation suits your shooting angles.
Mounting connections and accessories
A 1/4-inch-20 threaded hole and a cold shoe at the base provide two ways to connect the holder to compatible camera or tripod equipment.
The top cold shoe and threaded holes create options for attaching compatible accessories, including a light, microphone or power-bank holder. These mounting points can make a setup more adaptable, though the holder itself is the sole included component.
Keep the complete setup within its limit
The 500 g maximum load applies to the assembled setup, so account for the phone and any accessories you attach. The mount weighs 73 g, which helps keep its own contribution modest for a portable kit.
Treat the capacity as a firm planning constraint when deciding which additions to use.
Alternatives to SMALLRIG Phone Mount
Cell Phone Camera Mounts alternative

700+ ratings
Read Amazon ReviewsSMALLRIG Magnetic Metal Phone Mount 5156
Choose the 4382 if you want a width-based clamp for a range of phones.
The 5156 may suit a MagSafe iPhone user who prefers magnetic attachment and wants a detachable accessory plate, while its impact-related detachment caution is worth weighing for the planned setup.
- The Magnetic Metal Phone Mount 5156 is designed for iPhones with MagSafe functionality.
- It has two rotating shafts, a detachable top round plate that can serve as a mounting plate, and a stated 500 g load capacity; its description also cautions that external impacts may cause detachment.
- The Universal Phone Holder Mount grips phones by width, supports phones from 57 to 88 mm, and offers up to 180 degrees of adjustment through two rotary joints.
Is SMALLRIG Phone Mount Worth It?
The SMALLRIG Universal Phone Holder Mount 4382 is worth considering for phone-based photography, interviews, vlogging and livestreaming when you want flexible orientation and camera or tripod mounting.
Its broad width range and accessory interfaces give it useful room to adapt to a compact rig.
Check phone fit with its case and plan around the 500 g maximum load before buying. If those constraints work for your equipment, the holder offers a versatile way to add a phone to an existing setup.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount 4382
A flexible camera and tripod phone clamp for creators who want portrait and landscape framing with room for a light or microphone.
- Fits smartphones with widths from 57 to 88 mm.
- Attaches to a compatible camera or tripod using a 1/4-inch-20 threaded hole or the base cold shoe.
- Rotates between landscape and portrait orientation and locks at 90 degrees.
- Two rotary joints allow up to 180 degrees of adjustment.