Product Reviews

SmallRig Cold Shoe Mount Review: A Simple Two-Pack for Camera Rigs

A practical fit for camera rig owners who need basic cold shoe points for a microphone, flash, or LED accessory.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Cold Shoe Mount review is for camera users who want a straightforward way to add accessory points to a cage, handle, plate, or compatible block.

This two-pack pairs a compact aluminum mount with the screws and hex spanners needed for installation.

SmallRig Shoe Mount Review Summary

The quick verdict

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical fit for camera rig owners who need basic cold shoe points for a microphone, flash, or LED accessory.

  • Two cold shoe mounts are included, each measuring approximately 25 by 25 mm.
  • The mount body is made from aluminum alloy.
  • A 1/4-inch thread hole allows mounting to compatible camera cages, plates, handles, and other accessories.
  • Two M2.5 screws secure the shoe, and the package includes four M2.5 screws and two hex spanners.

Pros

  • Two mounts in the package provide a straightforward way to add more than one accessory point.
  • The 1/4-inch thread supports use across compatible cages, handles, plates, and similar rig components.

Consider before buying

  • Compatibility depends on the available threaded holes and the specific cage or rig; the product is not suitable for DJI or Zhiyun gimbals.
  • The mounting guidance has a specific exception for SmallRig Full Cage 1661, so owners of that cage should check the fitting approach before installation.
Read the full review summary

The SmallRig 2060 is a fixed cold shoe adapter with a 1/4-inch mounting thread, designed to attach accessories such as a microphone, flash, or LED to compatible camera rig hardware.

Two M2.5 screws secure the shoe, while a bent bevel at one end helps retain an accessory and white arrows indicate its mounting direction.

Its main appeal is practical value in a pair: buyers can add two accessory positions or keep a spare ready, provided their rig has compatible threaded holes. It is best suited to simple, static mounting needs.

The design is not intended for DJI or Zhiyun gimbals, and one SmallRig full cage model has a specific installation exception.

The buying factors

SmallRig Shoe Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting versatility

The 1/4-inch thread supports attachment to compatible cages, handles, and plates, and the mount can take several common camera accessories.

8/10

Installation clarity

Included screws and hex spanners support installation, and surface arrows make the intended mounting direction easier to identify.

7/10

Accessory retention

Two securing screws and a bent bevel at one end are useful retention features, though the mount remains a basic fixed shoe.

8/10

Pack value

The package includes two mounts and the hardware for fitting them, which can suit a rig needing multiple accessory points.

8/10

Portability

Each mount measures about 25 by 25 mm, making it a compact addition to a camera cage or plate.

6/10

Rig compatibility

It works with compatible 1/4-inch or M2.5 threaded mounting points, but the listed gimbal exclusions and cage-specific note call for a fit check.

Key Features and Specifications of SmallRig Shoe Mount

  • Two cold shoe mounts are included, each measuring approximately 25 by 25 mm.
  • The mount body is made from aluminum alloy.
  • A 1/4-inch thread hole allows mounting to compatible camera cages, plates, handles, and other accessories.
  • Two M2.5 screws secure the shoe, and the package includes four M2.5 screws and two hex spanners.
  • A bent bevel on one end is designed to help prevent accidental removal of a mounted accessory.
  • White arrows on the surface indicate the mounting direction.
  • The design is described for attaching a microphone, flash, or LED to camera rig accessories.

Pros and Cons of SmallRig Shoe Mount

Pros

  • Two mounts in the package provide a straightforward way to add more than one accessory point.
  • The 1/4-inch thread supports use across compatible cages, handles, plates, and similar rig components.
  • Included screws and hex spanners make the mounting hardware part of the package.
  • Compact dimensions and aluminum alloy construction suit a small rig accessory.

Consider before buying

  • Compatibility depends on the available threaded holes and the specific cage or rig; the product is not suitable for DJI or Zhiyun gimbals.
  • The mounting guidance has a specific exception for SmallRig Full Cage 1661, so owners of that cage should check the fitting approach before installation.
  • This is a fixed shoe mount, so buyers seeking an adjustable accessory angle should consider whether a different mounting style better suits their setup.

Who Should Buy SmallRig Shoe Mount?

Good fit

Consider the SmallRig 2060 if your camera cage, plate, or handle has a compatible 1/4-inch threaded hole and you want a simple shoe for a microphone, flash, or LED.

The two-piece package is especially convenient when you are expanding a rig with more than one accessory position.

The included M2.5 screws and hex spanners make the fitting process more self-contained.

Before buying, check the mounting point and confirm how the screws should be used for your particular cage; the stated guidance says most cages need only the included 1/4-inch screw, while SmallRig Full Cage 1661 is an exception.

Who should skip it

Look elsewhere if your setup depends on mounting this adapter to a DJI or Zhiyun gimbal, which the design excludes. Also consider another mount style if you need the accessory to tilt or reposition after installation.

How the SmallRig Shoe Mount Fits a Camera Rig

Mounting to cages and plates

The 1/4-inch thread hole is the key to fitting this shoe into a rig.

Check that your intended cage, handle, plate, or accessory has a compatible threaded point and enough room for the mount's roughly 25 mm square footprint.

The included M2.5 screws provide a second securing method where the mounting setup calls for them.

Keeping an accessory in place

The two M2.5 screws secure the shoe, while a bent bevel at one end is intended to help prevent an attached accessory from slipping off accidentally.

That design is useful for a compact mount, but it does not replace checking that the shoe and the accessory are properly seated before use.

Choosing what to attach

The intended uses include microphones, flashes, and LED lights, making the mount a practical addition when a rig needs another cold shoe point.

Since the product information does not give a load rating, buyers planning to mount a heavier accessory should confirm that the full rig and accessory connection are suitable for that equipment.

Checking the installation details

The arrows provide a quick visual cue for mounting direction, and the package includes the screws and hex spanners for installation.

Fit still depends on the specific hardware: the guidance describes a 1/4-inch screw for most cages and calls out a different approach for SmallRig Full Cage 1661.

Alternatives to SmallRig Shoe Mount

Camera Flash Shoe Mounts alternative

SmallRig Double Ball Head Adapter 1135
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Adapter 1135

Choose the 2060 if you want two simple fixed mounts for compatible rig hardware. The 1135 is a better fit when angle adjustment is useful and its weight guidance suits the accessory.

  • The 1135 uses a double ball head that rotates up to 180 degrees and locks with a side wingnut.
  • It has a cold shoe and 1/4-inch screw, and its stated maximum weight recommendation is 1 kg; the product advises against using it with monitors or LED lights over that amount.
  • The 2060 is a fixed cold shoe mount with a 1/4-inch thread and comes as a two-pack for adding straightforward accessory points.

Camera Flash Shoe Mounts alternative

SmallRig Mini Ball Head Cold Shoe Mount Adapter 3577
4.5/5

700+ ratings

Read Amazon Reviews

SmallRig Mini Ball Head Cold Shoe Mount Adapter 3577

The 2060 suits buyers who need two fixed shoe points on threaded rig hardware. Consider the 3577 when a single lightweight, tilting mount better matches the accessory and its stated weight limit.

  • The 3577 is a compact ball-head mount that tilts up to 138 degrees and supports devices up to 250 g.
  • It weighs 20 g, has a 1/4-inch screw on top, and attaches through a cold shoe adapter at its base.
  • The 2060 provides two fixed mounts and requires compatible threaded mounting points on a cage, plate, or handle.

Is SmallRig Shoe Mount Worth It?

The SmallRig Cold Shoe Mount 2060 is worth considering for a camera rig that needs simple, compact accessory points and has compatible threaded mounting locations.

Its two-mount package, included hardware, and retention-focused shoe design make it a practical option for adding a microphone, flash, or LED.

Check your cage or plate before ordering, especially if using a gimbal or the named SmallRig cage exception.

If your setup needs adjustable positioning or has a heavier accessory, choose a mount whose movement and load guidance match that requirement.

Your review at a glance

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical fit for camera rig owners who need basic cold shoe points for a microphone, flash, or LED accessory.

  • Two cold shoe mounts are included, each measuring approximately 25 by 25 mm.
  • The mount body is made from aluminum alloy.
  • A 1/4-inch thread hole allows mounting to compatible camera cages, plates, handles, and other accessories.
  • Two M2.5 screws secure the shoe, and the package includes four M2.5 screws and two hex spanners.

Written by

ukineuchallenge.com Editorial Team

Editorial team

Independent editorial coverage of uk & europe explained.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Cold Shoe Mount 2060

SmallRig Cold Shoe Mount 2060

A practical fit for camera rig owners who need basic cold shoe points for a microphone, flash, or LED accessory.

  • Two cold shoe mounts are included, each measuring approximately 25 by 25 mm.
  • The mount body is made from aluminum alloy.
Check Video Reviews on Amazon